In-line taps are a very useful AquaValve accessory - they can be inserted in-line just after the connection to the water reservoirs. Allowing you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.
- Choose 9mm for AquaValve5 and 9mm Fittings
- Choose 6mm for older, pre-August 2020 AquaValves with 6mm Fittings
- Choose 16mm for 16mm pipe